Efficient gene editing in Neurospora crassa with CRISPR technology

Background Efficient gene editing is a critical tool for investigating molecular mechanisms of cellular processes and engineering organisms for numerous purposes ranging from biotechnology to medicine. Recently developed RNA-guided CRISPR/Cas9 technology has been used for efficient gene editing in various organisms, but has not been tested in a model filamentous fungus, Neurospora crassa. Findings In this report, we demonstrate efficient gene replacement in a model filamentous fungus, Neurospora crassa, with the CRISPR/Cas9 system. We utilize Cas9 endonuclease and single crRNA:tracrRNA chimeric guide RNA (gRNA) to: (1) replace the endogenous promoter of clr-2 with the β-tubulin promoter, and (2) introduce a codon optimized fire fly luciferase under the control of the gsy-1 promoter at the csr-1 locus. CLR-2 is one of the core transcription factors that regulate the expression of cellulases, and GSY-1 regulates the conversion of glucose into glycogen. We show that the β-tubulin promoter driven clr-2 strain shows increased expression of cellulases, and gsy-1-luciferase reporter strain can be easily screened with a bioluminescence assay. Conclusion CRISPR/Cas9 system works efficiently in Neurospora crassa, which may be adapted to Neurospora natural isolates and other filamentous fungi. It will be beneficial for the filamentous fungal research community to take advantage of CRISPR/Cas9 tool kits that enable genetic perturbations including gene replacement and insertions. Electronic supplementary material The online version of this article (doi:10.1186/s40694-015-0015-1) contains supplementary material, which is available to authorized users.


Findings
Genetic engineering of organisms of interest are critical tools to elucidate molecular and cellular processes or to engineer organisms with new characteristics or traits. Clustered regularly interspaced short palindromic repeats (CRISPR)-associated RNA-guided DNA endonuclease, Cas9, has been driving the latest gene editing technology by taking advantage of the simple design of a single crRNA:tracrRNA chimeric guide RNA (gRNA). gRNA includes 20 base pairs of target sequences that causes double strand breaks by Cas9 at the target locus, which triggers gene replacement by homologous recombination (HR) [1][2][3] (reviewed by Hsu et al. [4]). CRISPR/Cas9 system has been utilized for gene editing ranging from yeast to human cells including filamentous fungi [5][6][7][8].
A model filamentous fungus, Neurospora crassa, has been used to elucidate fundamental molecular mechanisms including the one gene-one enzyme hypothesis, cell fusion, circadian rhythms, and epigenetics among others [9]. Gene editing by HR was a difficult task in N. crassa until the discovery of highly efficient gene replacement in Neurospora strains lacking mus-51 (NCU08290) or mus-52 (NCU00077), which are deficient in nonhomologous end-joining [10]. This finding facilitated the high-throughput generation of single gene deletion knockout (KO) collection of N. crassa [11]. However, one has to backcross Neurospora transformants to wild type in order to eliminate mus-51 or mus-52 KO background, which may take anywhere between one to three months. More importantly, there are numerous Neurospora natural isolates that are difficult to generate initial mus-51 or mus-52 KO, which make gene editing difficult. Therefore, it is critical to establish an alternative gene editing technology for the Neurospora system. The design of the CRISPR/Cas9 system consists of Cas9 DNA endonuclease and a guide RNA (gRNA) (Figure 1a). Cas9 is fused to the trpC (AN0648) promoter from the Aspergillus nidulans followed by both SV40 nuclear localization signal (NLS) domain and the trpC terminator sequence from the A. nidulans (Figure 1b) [12]. gRNA is fused to Small Nucleolar RNA 52 (SNR52) promoter from the Saccharomyces cerevisiae [13] and includes specific 20 base pair target sequences followed by gRNA structural component and SUP4 flanking region (Figure 1b). The promoter of SNR52 has been used to express gRNA in S. cerevisiae [14]. We designed target sequences for clr-2 (NCU08042) and csr-1 (NCU00726) loci followed by protospacer adjacent motif (PAM) (Figure 1c), which is required for target recognition.

Open Access
Cas9 and gRNA were constructed using PCR and yeast recombination (Additional file 1: Figure S1), and both Cas9 and gRNA were transiently transfected with a donor vector/plasmid. Donor plasmids were constructed using PCR and yeast recombination (Additional file 1: Figure S1, Figure 2a). We designed two separate constructs to: (1) drive the expression of clr-2 with β-tubulin (NCU04054) promoter, and (2) drive the expression of codon optimized fire fly luciferase [15] with the glycogen synthase-1 (gsy-1: NCU06687) promoter. CLR-2 is a zinc binuclear cluster transcription factor that regulates a large number of cellulases in N. crassa [16], and Glycogen Synthase-1 (GSY-1) is an enzyme that converts glucose into glycogen [17]. β-tubulin-clr-2 and gsy-1-luciferase sequences were followed by the bar gene for selection using Ignite ® (glufosinate), and they were targeted to its endogenous locus and csr-1 locus, respectively. csr-1 is a commonly used locus for transformation in N. crassa. Gene replacement of the csr-1 gene, which encodes the cyclosporin A-binding protein, leads to resistance to cyclosporin A [18]. The strains used in this study are listed in Table 1.
As a proof of principle, we set out to test overexpression of cellulases with the β-tubulin promoter-driven expression of clr-2, and efficient selection of luciferase reporters with a bioluminescence assay. 5 μg of β-tubulin-clr-2 circular donor plasmids were transformed into wild type N. crassa (74-OR23-1 V A) along with different concentrations of Cas9 and gRNA circular plasmids ( Figure 2b). Transformations were performed as previously described [19]. Dose-dependent increase of the number of transformants of β-tubulin-clr-2 was obtained by addition of Cas9 and gRNA (Figure 2b; Cas9 and gRNA plasmids: 0 µg: 1.0 ± 0.6; 1 µg: 0.8 ± 0.5; 2.5 µg: 42.0 ± 29.7; 5 µg 141.8 ± 92.9; n = 3, p < 0.01;  Tukey's method). We utilized optimal concentrations (5 µg) of Cas9 and gRNA with gsy-1-luciferase::csr-1 donor plasmid to transform the ras-1 bd N. crassa strain [20] (Figure 2c). gsy-1-luciferase::csr-1 that targets csr-1 locus enables double selection for both Ignite ® and cyclosporine A as previously described [21]. As expected, we were plated onto luciferin containing plates, and in vivo luciferase activities were monitored with a charge-coupled device camera. We observed 57 luciferase positive colonies out of 1,092 total colonies with CRISPR/Cas9 system, but no positive colonies were observed with non-CRISPR/Cas9 method of transformation [11,19] (Figure 2d-f ). The reason for low number of positive colonies with bioluminescence assay is due to the small sizes of other colonies, which do not produce detectable signals. Next, we assessed the efficiency of HR in 74-OR23-1V A with the CRISPR/Cas9 system versus mus-51 KO with the traditional method [10]. We observed efficient transformations with both methodologies (Figure 3a; mus-51 KO: 23 ± 56; CRISPR/Cas9: 66 ± 103; n = 4). Successful transformants at the clr-2 locus were validated through polymerase-chain reaction (PCR) analysis (see Table 2 for primers used in this study). The transformants were grown in liquid culture media, and we did not observe any differences of growth between the transformants from both methodologies. The genomic DNA was extracted from the transformants with either 74-OR23-1V A or mus-51 KO background, and quantitative PCR (qPCR) analysis was performed to count the number of transgenes in the genome. Similar number of transformants showed more than one clr-2 in their genome from both methods (CRISPR/Cas9: 6/20; mus-51 KO: 7/20; Figure 3b). As a control, we tested the number of gh6-2 in each genome and confirmed that none of the transformants had more than one gh6-2 (Figure 3c). The transformants with single clr-2 in their genome were further validated by PCR to confirm the β-tubulin promoter fused to clr-2 gene (Figure 3d). Interestingly, we observed three transformants from each method that exhibit the correct HR events at the clr-2 locus (CRISPR/Cas9: 3/14; mus-51 KO: 3/13; Figure 3e).
In this report, we successfully demonstrated efficient gene replacements utilizing CRISPR/Cas9 technology in a model filamentous fungus, N. crassa. N. crassa did not indicate any problems in expressing functional Cas9 endonuclease under the A. nidulans trpC promoter, and the SNR52 promoter is operational to express gRNA in N. crassa as in S. cerevisiae [14]. These events enabled us to perform efficient knock-in of clr-2 with β-tubulin promoter and target gsy-1-luciferase bioluminescence reporter at the csr-1 locus with relatively simple modifications of template plasmids utilizing PCR and yeast recombination. In contrast to previously established gene editing protocols in Table 2 Primers used in this study

Materials and methods
Materials and methods and any associated references are available in the online version of the paper at http://www. fungalbiolbiotech.com/ (Additional file 2).

Additional files
Additional file1: Figure S1. Full plasmid sequences of the Cas9, gRNA, and donor vectors. Green, orange, blue, red, light blue, gray letters indicate the promoter, coding sequence, terminator, gRNA, homologous region, and bar gene cassette, respectively. 20-bp target sequences in gRNA are underlined.